********************************************************************************************** ***** ***** ***** LP-Bridge and LPB2 USERS: ***** ***** UPDATE TO THE LATEST VERSIONS OF LP-Bridge or LPB2 ***** ***** The K3 data decoder window needs a new version ***** ***** ***** ***** SOME Creative DRIVERS CAN CRASH 64 bit SYSTEMS ***** ***** UNLESS SYSTEM MEMORY IS SET TO 4GB OR LESS. ***** ***** ***** ***** .NET 3.5 is needed in your system but MS updates should have put it there ***** ***** ***** ********************************************************************************************** For first time installations: 1. Unzip the setup file, run setup.msi and wait while a minute or so one-time cpu math check completes some calculations on your cpu to find out what its 'wisdom' is. 2. You can click OK at any time; once the check is complete you will never see it again and NaP3 startup will continue normally. 3. Read the Help file; if you find yourself stuck, ask other users - there is plenty of experience out there. ********************************************************************************************** For existing installations: 1. NB: installation now overwrites previous versions 2. Unzip the setup file and run setup.msi to install the new version. 3. The first run will merge your old database with a new one and your original settings should still be there - possibly with a few new ones! ********************************************************************************************** Read the Help file. Play with NaP3. If you do not understand something, read the Help file again, or try the NaP3 group. ********************************************************************************************** Discussion, mutual support at http://groups.yahoo.com/group/NaP3/ Pete Connors, F5VNB June 2013